One-stop comprehensive solution provider
A pre-shipment inspection (PSI) is your last chance to catch problems before you pay the balance and the goods leave China. Once the container is on the water, a quality problem becomes a negotiation with no leverage. Done properly, a PSI takes one day and can save an entire order. Here is what it should cover.

1. When to inspect - and how sampling works
A PSI happens when production is 100% finished and at least 80% of the order is packed. Any earlier and you are inspecting goods that do not exist yet.
The inspector does not check every unit. They pull a random sample from cartons across the whole lot, using the ISO 2859-1 standard at General Inspection Level II - the default for consumer goods. The sample Page size depends on the lot size:

If defects in the sample reach the reject number, the lot fails. Random matters: the sample must come from different cartons across the lot, not from the neat cartons the factory offers first.
2. The three defect classes
Every defect falls into one of three classes, each with its own tolerance:
• Critical - AQL 0, zero tolerance. Safety hazards, illegal, or completely unusable. One critical defect fails the lot. Examples: exposed live wire in an electrical product, broken glass in a kitchen tool, missing safety label on a children's product.
• Major - AQL 2.5. The product is unsellable or clearly below specification. Examples: broken zip on a bag, missing component, wrong colour on a branded surface, cracked ceramic.
• Minor - AQL 4.0. Cosmetic flaws that do not affect Page function and that most customers would accept. Examples: small scratch in a hidden area, slight ink smudge on packaging, minor stitching inconsistency. Agree the defect list with the factory before production starts, not after a dispute.
3. The inspection checklist
A thorough PSI covers all of these:
• Quantity and carton count - does the packed quantity match the order?
• Appearance and workmanship - stitching, finish, seams, surface defects.
• Function test - every sampled unit powered on, operated, or assembled as the buyer would use it.
• Dimensions and weight - measured against the specification and the approved sample.
• Colour - compared with the approved sample under proper light.
• Labelling, barcodes, and manuals - correct, legible, and in the right language.
• Packaging and carton condition - retail box, inserts, carton strength, and a carton drop test.
• Comparison with the golden sample - the sealed reference sample both sides signed off.
4. What a good inspection report includes
A report without photos is a claim, not evidence. Insist on photos of every defect found, measurements taken, defect counts by class, a pass or fail verdict per class, and a clear overall conclusion. Read the report the same day it arrives - while the goods are still in the factory and something can still be done Page about them.
5. If the inspection fails
Do not pay the balance and do not ship. Your options are: the factory reworks the goods and you re-inspect; the lot is sorted and only good units ship; you negotiate a discount for the defect level; or you cancel. All of this is far easier if the inspection terms - AQL level, defect classes, who pays for re-inspection - were written into the purchase order before production started. After a failure is too late to agree on them.

FAQ
Who pays for the inspection? Usually the buyer. A third-party inspection man-day in China typically costs around $200-$300 - small against the value of the order it protects.
PSI or during-production inspection - which one? Page Use both on first orders. A during-production inspection (DUPRO) catches problems mid-run, when they can still be fixed. The PSI is the final gate before shipment.
Can the factory inspect its own goods? No. That is a conflict of interest. Use an independent third-party inspector or your sourcing agent.
Get help with inspection
ChinaSift can coordinate pre-shipment inspections and provide the findings for your review - or handle the whole order, from supplier vetting to final inspection, under our $129 Sourcing Trial, fully credited against commission if you order within 90 days.
Contact us on WhatsApp at +86 18312155383 or email info@chinasift.com.
Backpacks look simple, which is why they are easy to buy badly. Clusters, a same-spec quote comparison, MOQs and the five QC checks for sourcing backpacks from ···
Sourcing vacuum bottles from China? 2026 price benchmarks, 304 vs 316 steel,LFGB/FDA certification guidance, and factory vetting tips for new buyers.
What does a China sourcing agent actually do? How they charge, how to spot hiddenkickbacks, and our 3-step process — with transparent pricing.